16A Timing Appointment Support Type2 AC 400V EV Charger,Smart Wallbox Charging Station
Description of Type2 Wallbox EV Charger
This product is mainly composed of charging station host, charging gun, wire, installation backplane, installation ingredients package, etc. It is a household electric vehicle charging equipment. The AC charging station is connected to the mains, the electric vehicle will be safely and reliably charged by the charging gun interface; to avoid affffecting the product performance, should no acid and alkali and other corrosive gases in the surrounding; try to avoid direct rain or use in environments with high humidity, and should try to prevent damage from impacting the housing.
Product parameter description:
| Model | M7 | M11 | M22 |
| Input / Output Voltage | AC230V / Single Phase | AC 400V / Three Phase | AC 400V / Three Phase |
| Input / Output Current | 8,12,16,20,24,28,32
adjustable | 8,10,12,14,16A
adjustable | 8,12,16,20,24,28,32A
adjustable |
| Max Output Power | 7.36 KW | 11.04 KW | 22.08 KW |
| Frequency | 50/60Hz |
| Input Cable | 1M, hard-wired |
| Charging Plug | Type 2(Mennekes) |
| Output Cable | 5M |
| Withstand Voltage | 3000V |
| Work Altitude | <2000M |
| Stand by | <3W |
Protection
| over voltage protection, over load protection, over-temp
protection, under voltage protection, earth leakage protection,
lightning protection, short circuit protection |
| IP level | IP65 |
| Touch Button | No |
| LCD Screen | No |
| Current Adjustment | Yes |
| Bluetooth APP Charging | Yes / No |
| WiFi APP charging | Yes / No |
| RFID | Yes |
| Timing / Appointment | Yes / No |
| Certification | CE, RoHS |
Function introduction of Type2 Wallbox EV Charger
1.Residual current detection (RCD)
Ac leakage protection automatically detects the AC mismatch between the power supply wires,
which indicates that the current flflows through the grounded (PE) wire. Ac residual current fault
protection will trip when the current is 30 Ma.
2.Surge protector
In: 3kA, lmax:6kA
3.Leakage protection
When the leakage protection is started, it needs to be cut offff the power outage and restart.
4.Overcurrent protection
When the current exceeds the early warning value,the charging pile cuts offff the power output, restarts
automatically after 10 seconds, and does not recover automatically after 3 cycles until you cut of the
power and restart.
5.Overvoltage protection
The protection starts when the voltage exceeds 275V, and automatically recovers when the voltage
is restored and stabilized.
6.Undervoltage protection
Start the protection when the voltage is less than 100V, and restore automatically when the voltage
is restored and stabilized.
7.Overtemperature protection
Start the protection when the internal temperature of the EV charging station exceeds 85 °C.
Installation Procedure:
1. Please use a percussion drill to drill holes according to the cardboard positioning
2. Install expansion bolts(6*M6*60MM)
3. fix the Mounting backplane with self=tapping screws(6*M5*50mm)
4. Align the main unit with the buckle on the back panel and install it, and then use screw
to fix(4*M5*40)
Instructions
1. When the machine is on standby normally, the indicator light is fixed blue.
2. Remove the charging gun from the holder, insert the charging gun into the car charging socket.
3. After the gun insertion completed, the vehicle automatically starts to charge normally, and the blue meteor light on.
4. The indicator light always turns blue after the charge is completed.
Product Tags:
|
|
16A Timing Appointment Support Type2 AC 400V EV Charger Smart Wallbox Charging Station Images
|
